I General technical requirements1 Product specification
This type is the letter printing machine, with axes UV solidified, suitable for printing on plastic cups.
II General Structure requirements
1 Automatic cup-delivering
The cups will be horizontally delivered to the channel by the feeding belt automatically, which could
reduce labor intensity. The cup-delivering channel will be powered by electronic engineering sharing
the same speed with pressing.
2 Principal machine and transmission equipments
Founding stand for machine is steadily reliable, and there is a complete adjusting system with X and
Y coordinates system. Principal machine is powered by the frequency conversion electronic engineering,
and in-phase with the speed of the delivering channel. There is also an automatic mode-switch device
for the easy using of these two pressing mode. This principal machine is also convenient for the
manipulator to see the operation of the machine, by the windows both around and the open-ceiling,
in order to make the correct working step.
3 Pre-printing treatment
Corona treating is applied before printing. Processor axis is driven by rubber wheel which is driven by
electronic machine, ensuring precise pressure.
When cups penetrated through, processor will given an alarm, in order to deal with it timely, preventing
damage to the printing.
4 Printing
Printing stand is driven by machine; easy to adjust ink feeding volume..
Printing roller is equipped by fixing linchpin beard by spring for the purpose of changing plate quickly.
Printing platen is equipped with 4 rubber printing stands, adopting double-face glue, and auto-stop
when double or no cups.
QC checkpoint is adopted.
5 axis (station) UV desiccation
UV light is 6kw, equipped with specially made glisten cover, cooling system and ozone venting system.
Light is auto out when machine stops or no cup in machine.
6 auto cup ejecting
Cup ejecting speed accords to printing speed, avoiding wrong counting.
Counting wheel is adopted based on the height of cup, avoiding mistakes.
Pneumatic device is applied to eject cups.
Cup incept plate angle can be adjusted, max ejecting distance is 800mm.
7 electric control
The whole machine is controlled by low voltage appliance, all appliances in one control tank, with
suitable height. Control plate is a base, can be placed anywhere by controller. Machine parts are
connected by movable plugs, convenient for disassembling and machine.
III,Technical file
When machine is output, instructions book, acceptance certificate and
packing list are necessary.
IV. Main configuration
This type is the letter printing machine, with axes UV solidified, suitable for printing on plastic cups.
Model | YXJY6A |
Printing diameter | ¢40mm~¢95mm |
Requirements for the size of the cups or bowls | ¢50mm~¢100mm |
Maximum printing height | 100mm |
Height of cup | 30~150mm |
Bevel of cup or bowl | 12°(maximum) |
Maximum printing speed | 10000 per hr |
Motor Power(Kw) | 18kw |
Dimensions | 5000*2000*1800 |
1 Automatic cup-delivering
The cups will be horizontally delivered to the channel by the feeding belt automatically, which could
reduce labor intensity. The cup-delivering channel will be powered by electronic engineering sharing
the same speed with pressing.
2 Principal machine and transmission equipments
Founding stand for machine is steadily reliable, and there is a complete adjusting system with X and
Y coordinates system. Principal machine is powered by the frequency conversion electronic engineering,
and in-phase with the speed of the delivering channel. There is also an automatic mode-switch device
for the easy using of these two pressing mode. This principal machine is also convenient for the
manipulator to see the operation of the machine, by the windows both around and the open-ceiling,
in order to make the correct working step.
3 Pre-printing treatment
Corona treating is applied before printing. Processor axis is driven by rubber wheel which is driven by
electronic machine, ensuring precise pressure.
When cups penetrated through, processor will given an alarm, in order to deal with it timely, preventing
damage to the printing.
4 Printing
Printing stand is driven by machine; easy to adjust ink feeding volume..
Printing roller is equipped by fixing linchpin beard by spring for the purpose of changing plate quickly.
Printing platen is equipped with 4 rubber printing stands, adopting double-face glue, and auto-stop
when double or no cups.
QC checkpoint is adopted.
5 axis (station) UV desiccation
UV light is 6kw, equipped with specially made glisten cover, cooling system and ozone venting system.
Light is auto out when machine stops or no cup in machine.
6 auto cup ejecting
Cup ejecting speed accords to printing speed, avoiding wrong counting.
Counting wheel is adopted based on the height of cup, avoiding mistakes.
Pneumatic device is applied to eject cups.
Cup incept plate angle can be adjusted, max ejecting distance is 800mm.
7 electric control
The whole machine is controlled by low voltage appliance, all appliances in one control tank, with
suitable height. Control plate is a base, can be placed anywhere by controller. Machine parts are
connected by movable plugs, convenient for disassembling and machine.
III,Technical file
When machine is output, instructions book, acceptance certificate and
packing list are necessary.
IV. Main configuration
No. | Device | Specification | Quantity | Brand or producer |
1 | Electrical Motor | 5.5KW | 1 | Gongtai |
2 | Inverter | 5.5KW | 1 | Invt |
3 | Air-break Switch | Several | CHNT | |
4 | AC Contactor | Several | CHNT | |
5 | Switch | Several | CHNT | |
6 | Fan | 1.3/1.9KW, 2.4/3.0 m3/min | Guangzhou | |
7 | Cam Reducer | 1 | Korea | |
8 | UV Lamp | 6KW | 1 | Yixin |
YONGXU Machinery professionally in plastic cup thermoforming equipment line manufacturing! | |
1. PAYMENT TERMS | 30% deposit by T/T and 70% by T/T before of shipment |
2. PRICE TERMS: | FOB NINGBO PORT CHINA |
3. DELIVERY TIME: | With in 30 days after receipt of your deposit |
4. PACKING: | Film wrapping,but Wooden base package by extra charge. |
5.GUATANTEE | Machine with one year warranty,all spare parts will be given free within 1 year Engineer dispatch is possible,the buyer must assume the cost of round-trip airfare and accommodation etc.The salary is 90USD/Day. |
6. Valid Period | 1 months |